New exhaust, Hayward and Scott.

Had to share some pics of my new exhaust made by Hayward and Scott. Lovely job in polished stainless complete with O2 bungs should they ever be needed.
91E36777-5E33-4E8A-ACAD-5DDFDD75CF27.jpeg
05290F26-F965-459F-B0FC-470925FA762C.jpeg
5E91C0E1-89B8-4C61-9448-424FA02EE7B5.jpeg
D9A41755-1B38-488E-94C6-2AABE62C3D62.jpeg
4AEDE2B7-5B93-4E42-B41A-8FA95ED65631.jpeg
B42CCE07-204A-40F0-A379-4AEBD48E1688.jpeg
4EB20C2D-F613-44C7-B2C5-62742D25D1F2.jpeg
 
Nice work Simon! Is your car a GTD with the stock , non lowered engine orientation? My GTD has the stock straight exhaust and am looking to go with bundle of snakes as well. Maybe Hayward could be the answer. If so, how is the clearance to the clip from where they cross in the middle?

Eric
 

Ian Anderson

Lifetime Supporter
They look very nice.
are you able to get the plugs in and out without removing them? And which way will you run the cables? Over top and down or below and then up?

Ian
 
Not tried the plugs yet, brought it home then had to get back to grandparent duties!
Not sure about the leads, will certainly need some protection from the pipes!
 
Fantastic looking exhaust ist something i want to change on mine in the future i see people asking if the engine is lower i did not build mine me self so how would i be able to tell what would i look for cheers.
 

Attachments

  • 279631421_1197081441062968_1103684991529551402_n.jpg
    279631421_1197081441062968_1103684991529551402_n.jpg
    467.5 KB · Views: 178
  • 279651718_1197081461062966_3056193553763248110_n.jpg
    279651718_1197081461062966_3056193553763248110_n.jpg
    529.8 KB · Views: 189
Back
Top