Shift Gate for ZF 5DS-25/2 using RCR Cable Shift Box

[Pasha Saleh]

Does anybody have/make a shift gate for this?

Main interest would be to avoid accidental down from second to first when upshifting to third!

 

[Neal]

PI Motorsports has one. Scroll down for the lockout version. Not sure if it would work.

S Products

I’m going to draw one up and have it cut once I’ve established my shifter throws. I have the same setup you have. I can have a few done if you are interested.

 

[Jean-Marc]

Neal, I am interested too !

 

[Ron McCall]

Pasha,

Corey, the owner of CNC that makes the cable shifter is working on a shift plate as we speak. It should be ready any time now.

Ron

 

[Pasha Saleh]

Thanks everyone! Will be on the lookout for Neal and Corey's

Ron -- it did happen once (I wasn't driving) when a full throttle 2 to 3 shift ended up in first gear. I thought I was going to lose it but the bulletproof transaxle you built me didn't flinch (or spit a gear thank God)! I've said it before, but I'll say it again. The best part of our RCR40 is the ZF that Ron McCall put together.