Slc 007 for sale *SOLD*

[Dave Lindemann]

After almost 5 years I've come to the sad conclusion that I simply do not have the time or desire to build the car. This is a package deal that includes the original SLC Deluxe Plus kit, a new LS3 crate engine, and a refurbished Ricardo gearbox all purchased from RCR. All of the "extra" parts listed below are brand new in their original packaging. For someone looking to get into an SLC kit this is an excellent opportunity as most of the parts sourcing is done and you don’t have to wait to have RCR build your car! My asking price is $65,000. I'm not interested in trades.

PM me if interested.

Regards,
Dave L
Minnesota, USA

SLC Deluxe Plus Kit, Chassis #007, Street Tail, ISIS Wiring
Fiberglass Interior Package
Front Lift Kit
LS3 Crate Engine, Pedal, Controller, Harness
LS7 Exhaust Manifolds (New)
Oxygen Sensors (2 - AC Delco)
C6 GM Service Manual Set
Katech LS Valley Cover (Reverse Intake)
Katech Oil Pressure Sensor Adapter (For Gen 4 LS3)
Fuel Surge Tank (CX Racing)
Fuel Sender (Fuel tank modified to fit Centroid sender for Digidash)
Fuel Pump (Bosch 044)
Fuel Pump (Holley 12-125)
Fuel Regulator (Aeromotive)
Fuel Filter (Summit 100 Micron - Red)
Fuel Filter (Summit 10 Micron - Red)
Ricardo Gearbox
Flywheel
Flywheel Bearing (Replaces Standard Bushing)
Clutch (Stillen Performance/AP Racing)
Starter (Ford Racing)
Tilton Pedal Assembly (600 Series Aluminum)
Tilton 3 Chamber Brake/Clutch Remote Reservoir
Custom Chassis Number Plate
Tires Kumho ECSTA 285/35-ZR19, 245/40-ZR18
Swift Springs 4"/600-lb (Front - for use with Lift Kit)
LED Marker Lights
Custom Aluminum Coolant Tank
Electronic Heater Control Valve
Hardware (Engine Mounts, Adapter Plate, etc.)
Adjustable Aluminum Pedal Mount
Ramlift Install Kit (Braided Lines, Reservoir, etc.)
Wiper Motor (TMC Heavy Duty)

Note that the photo of the car has the race tail that the car was purchased with. The car comes with the Street tail.

 

[Doug S.]

Re: Slc 007 for sale

What a shame you had to make that hard decision, Dave.

I'm sure it'll go quickly....I'd say "Good Luck", but I don't think you'll need luck to make the sale.

Doug

 

[Michel]

Re: Slc 007 for sale

Hello
I wish I would be in UK or any other nice country where homologation was possible to acquire from you this very nice group kit !!
The price is more than reasonable thinking to all time necessary to source every thing and get them on the same place !!!!
It's a shame there in France it's impossible at 100/100 to have it homologated to drive on normal road .
Hope you will find kickly an other home builder :worried:

 

[Dave Lindemann]

Re: Slc 007 for sale

Here's an important part for anyone using an LS3 engine needing to reverse the intake. This is a new oil pressure sensor fitting from Katech that works with their valley cover and works without having to modify anything. Not inexpensive at $169.99!

 

[Doc Kaler]

Re: Slc 007 for sale

Dave,

You've got everything you could want to get started at a great price! You "fence-sitters" need to jump on this!!

 

[Garrett Johnson]

Re: Slc 007 for sale

damn what a deal! Wish I could gather the finances.

 

[Dave Lindemann]

Re: SLC 007 for sale

A couple of people have PM'd me and suggested that I provide more details on what I paid for the extras and what has been changed from when the car was delivered. I'll do my best here.

SLC Deluxe Plus Kit, Chassis #007, Street Tail (delivered with race tail and wing - sold), ISIS Wiring, DigiDash, Wilwood brakes, Hot Rod Air, no coolant pipes and no exhaust past the manifold. $43,995
Fiberglass Interior Package $1,500.00
Front Lift Kit $1795.00
LS3 Crate Engine, Pedal, Controller, Harness $7,810.00
LS7 Exhaust Manifolds (New) $258.87
Oxygen Sensors (2 - AC Delco) $136.58
C6 GM Service Manual Set $176.98
Katech LS Valley Cover (Reverse Intake) $199.99
Katech Oil Pressure Sensor Adapter (For Gen 4 LS3) $169.99
Fuel Surge Tank (CX Racing) $73.00
Fuel Sender (Fuel tank modified to fit Centroid sender for Digidash) $69.00
Fuel Pump (Bosch 044) $232.88
Fuel Pump (Holley 12-125) $199.95
Fuel Regulator (Aeromotive) $149.95
Fuel Filter (Summit 100 Micron - Red) $69.95
Fuel Filter (Summit 10 Micron - Red) $59.95
Ricardo Gearbox $6,275 (good luck finding one at that price now....)
Flywheel $475.00
Flywheel Bearing (Replaces Standard Bushing) $41.65
Clutch (Stillen Performance/AP Racing) $2,069.95
Starter (Ford Racing) $667.35
Tilton Pedal Assembly (600 Series Aluminum) $100.00 (exchange for stock RCR pedal assembly)
Tilton 3 Chamber Brake/Clutch Remote Reservoir (also includes the stock Wilwood units) $92.65
Custom Chassis Number Plate $25.00
Tires Kumho ECSTA 285/35-ZR19, 245/40-ZR18 $1,028.00
Swift Springs 4"/600-lb (Front - for use with Lift Kit) $156.25
LED Marker Lights $16.90
Custom Aluminum Coolant Tank $222.45
Electronic Heater Control Valve $103.25
Hardware (Engine Mounts, Adapter Plate, etc.) $52.01
Adjustable Aluminum Pedal Mount $100.00
Ramlift Install Kit (Braided Lines, Reservoir, etc.) $156.94
Wiper Motor (TMC Heavy Duty) $90.00
Modified Fuel Tank (to allow fitment of the Centroid fuel sender) $1,025.00

Total investment = $69,594.49

If the buyer prefers, I will install the engine and gearbox in the chassis (for shipment purposes only). The dash has been partially cut to fit and the DigiDash inset opened up to allow the unit to be mounted deeper in the dash. Openings for lights, glass, etc. have been cut out.

I hope this helps. If anyone has questions please ask and I'll do my best to answer them.

Regards,
Dave L

 

[Ricardo Montalvo]

Re: Slc 007 for sale

Wow...smoking deal. If anyone realizes how much time is spent just researching and ordering parts alone, it's worth it!

 

[Ben Whittle]

Re: Slc 007 for sale

Okay... I might have to jump on this...

 

[Jack]

Re: Slc 007 for sale

Jump on it Ben, Dave L. has all the "right stuff" to go with it! Really a screaming deal for the right buyer..

 

[Dave Lindemann]

Re: Slc 007 for sale

I need to make a minor change to the parts specifications. A fellow SLC owner with a very high HP engine and a Ricardo gearbox asked if I would exchange the Stillen AP Racing clutch for his Ford Racing clutch - new, in the box. So, the kit will now come with the Ford GT clutch - which had a purchase price of $1,975. The Ford Racing clutch is more than adequate for the stock LS3.

Anyone looking at a new Stillen clutch the price has jumped to $3,759.50!

Dave L

 

[Fran Hall RCR]

Re: Slc 007 for sale

The $3759 clutch is actually the stage 2 package which is completely different than the stage 1 units....

The stage 1 is still available around $2100

The stage 2 has a smaller aluminum lighter flywheel included STILLEN Performance Race Clutch by AP Racing FGT402000 | STILLEN

I spoke with Stillen about these very units last week as we are using a modified one in the SLC with our Sadev sequential transaxle....

 

[Dave Lindemann]

Re: Slc 007 for sale

Fran - Thanks for the clarification. My mistake.

Dave L

 

[Dave Lindemann]

Re: Slc 007 for sale

Brief update - I've gone ahead and reversed the intake on the LS3 (see the build thread) using the Katech parts so that's one less task for a potential buyer. Once I receive the Ford Racing clutch I plan to install the flywheel and clutch, mate the Ricardo and LS3 and install them in the chassis.

I spent some time this weekend cleaning up the car, doing some re-assembly and trial fitting some parts. Here are some recent photos.

Regards,
Dave L

 

[Will Campbell]

Re: Slc 007 for sale

Good pics- I wish you were able to finish it, but if that isn't possible, someone will enjoy building it!

 

[Dave Lindemann]

Re: Slc 007 for sale

Here is the Ford GT clutch that will be included in place of the Stillen unit.

Dave L

 

[Dave Lindemann]

Re: Slc 007 for sale

I've had someone ask about the wheels and seat covers. The wheels are new from a Corvette - gloss black, 5-spoke with a polished lip as shown. The seat covers are stock RCR, padded, with adhesive backed Velcro for fitting to the fiberglass shells. Please note that in the photo the seat cover is simply draped over the seat shell and not fully installed.

Regards,
Dave L

 

[Lou Cicconi]

Re: Slc 007 for sale

Please check your PM'S

 

[Dave Lindemann]

Re: Slc 007 for sale

Lou -

You may want to try sending again - I see nothing from you in my PM's.

Regards,
Dave L

Please check your PM'S

 

[Lou Cicconi]

Re: Slc 007 for sale

OK, I sent it again. Thanks, Lou