Superformance weather stripping?

[joe]

Does anyone know what Superformance uses for door weather stripping? I currently have the bulb-style that same with my AP car and am not too thrilled with it. it seems like the Superformance style is more of what an OEM would use. Any thoughts?

 

[Lee Patterson]

it pinches over the edge and has a vertical piece of rubber that points up and back - basically turning from vertical to horizontal where it meets the door surface

 

[Rick Muck- Mark IV]

Look here for alternates: https://metrommp.com/seals/door-seals/press-on-trim-seals/

I found the seals on the sponsons didn't mate to the inner door surfaces; you can reach under and put your fingers in the gap. I used a self-adhesive seal from the hardware store that had three ridges on the lower inner door surface that mated to the factory seal and eliminated 90% of the open gap.

 

[joe]

I'm wondering if this style would work better.

Pinchweld Trim Seal -TS 7-12

TS 7-12 Pinchweld Trim Seal by Metro Moulded Parts offers a snug seal for vehicles. Made of EPDM rubber, steel core, 12ft length, black finish.

metrommp.com