Windsor 383 Stroker Engine Parts

I will have the following 351W engine parts available soon.
- 351W C9 1969 block newly refurbished and rebored to +40 thou.
- Ford stroker cast iron crank.
- Eagle stroker steel crank. Boxed brand new.
- Keith Black high silicone pistons. Boxed brand new.
- Eagle H beam stroker rods.
- Crower 280 roller cam.
- Dart 2 cast iron heads, valves, springs.
- Granada flywheel machined for 7 1/4 clutch.
- Fluidamper, externally balanced.

All of these items are perfectly matched to assemble a 383 cu in motor and with this mild cam will produce approximately 450hp and 480ft/lbs.
No more specific details, p/n's, prices etc, are currently available. Mail me if you are interested and I will reply with full details after 11th January and at which time they will be immediately available.

 

Here are the prices plus more data for the sale items I have posted above.

All items to rebuild my 'DWR Racing Engines' 383 cu in Stroker motor including new Keith Black forged pistons, ring set, gaskets, mains and big end bearings, etc but excluding intake manifold and sump. £5150
This motor had covered less than 3k miles when a fueling problem (not of DWR making) caused excessive bore wear and resulted in the motor requiring a rebored to +40 thou. Motor is stripped for buyers inspection at DWR engine shop.

Eagle 3.75" stroker steel crank, 3" mains.Boxed new. £550

Fluidamper externally balanced. Used, perfect. £210

Cloys steel timing chain set. 9 key way. Used, perfect. £35