Latest activity

What's new Featured content New posts New media New media comments Latest activity
  • R
    RTIMTE posted the thread Roaring Forties GT40 kit for sale with all aluminum stroked 351W in GT40 Cars For Sale.
    My Roaring Forties Kit with all aluminum 351W punched out to 427 CI. The Engine is a work of art! Assembled by Keith Craft Race Engines...
    • IMAG0330.jpg
    • IMAG0336.jpg
    • IMAG0337.jpg
    • IMAG0343.jpg
    • IMAG0344.jpg
    • IMAG0352.jpg
    • IMAG0353.jpg
    • IMAG0354.jpg
    • IMAG0355.jpg
    • IMAG0356.jpg
  • H
    howlin.man replied to the thread RCR40 Belts.
    Hi Chris: Can you explain your concern? I suppose it is the angle of the lap belt (which may be less than 60 deg - see diagram from...
    • sabelt-figure.jpg
  • P
    pattersonlee reacted to SpyderMike's post in the thread Need cooling help please with Like Like.
    Success?! I used the Airlift to pull the vacuum and put my coolant mixture in (just about 4 gallons). I also put in about 8 quarts of...
  • R
    Rob Parker reacted to Blwngt40's post in the thread AKSPORTSCARS #17 with Like Like.
    Little paneling done again up front this time. Going to remake the panel above the steering rack, I do not like the original fitment...
  • J
    jlwdvm replied to the thread And so it begins...the AP build..
    I have only mounted the adapter plate and starter to the trans. So far, so good. I haven't finished grinding out the starter area yet...
    • IMG_1892.jpeg
    • IMG_1894.jpeg
  • Big-Foot
    Big-Foot reacted to ckouba's post in the thread RCR40 Belts with Like Like.
    Whatever you do, please don't use the installed anchors for the lap belts. They are in entirely the wrong place and will likely do more...
  • Big-Foot
    Big-Foot reacted to SpyderMike's post in the thread Need cooling help please with Like Like.
    Success?! I used the Airlift to pull the vacuum and put my coolant mixture in (just about 4 gallons). I also put in about 8 quarts of...
  • Big-Foot
    Big-Foot reacted to Soluz's post in the thread P1047j??? with Like Like.
    Sorry for exhume an old post, but maybe can be interesting for someone. An MKIIB recently came to my city in Italy for an historic hill...
  • Big-Foot
    Big-Foot reacted to nvoort's post in the thread Columbus Ohio RCR40 with Like Like.
    Also on the topic of wiring, we opted to try out a product from "race wire solutions" LINK. Essentially it's just a set of flying leads...
  • J
    Jerry41 replied to the thread 363ci V8 Starting Issues.
    a click and no engine turn over could indicate a bad earth or duff high resistance joint, enough current flows to engage the solenoid...
  • M
    Morten A. Larsen replied to the thread 363ci V8 Starting Issues.
    I also have the 900cca redtop battery, and as it goes I left the battery without any trickle charge for a few months. Result: a totally...
  • P
    Pantera1889 reacted to nvoort's post in the thread Columbus Ohio RCR40 with Like Like.
    Also on the topic of wiring, we opted to try out a product from "race wire solutions" LINK. Essentially it's just a set of flying leads...
  • V
    Vinny P reacted to nvoort's post in the thread Columbus Ohio RCR40 with Like Like.
    Well the summer has started off with lot's of weekend activities but still trying to make time for the GT40... First up was to finish...
  • V
    Vinny P reacted to nvoort's post in the thread Columbus Ohio RCR40 with Like Like.
    Also on the topic of wiring, we opted to try out a product from "race wire solutions" LINK. Essentially it's just a set of flying leads...
  • ckouba
    ckouba replied to the thread RCR40 Belts.
    Whatever you do, please don't use the installed anchors for the lap belts. They are in entirely the wrong place and will likely do more...
Show older items
Back
Top