Latest activity

looks like your getting along nicely Chris. if you have them, offer up the fuel tanks as the float access holes dont line up with the...

phil for the inner studs for the fuel tank mounts,same issue stud fouls on the fitting,i dremelled down and bought 3/8 half nuts worked...

Chris, the panel numbering is different because my set was one of the last sets purchased by AK direct from Southern GT. Once AK did an...

progress looks good Phil, My tank hole for the gauge was the same as yours.. and it happened to me ...yes you will be taking the float...

Before I started the build I took some measurements of the chassis to make sure that everything was square as the panels left/right...

It's been a while since I'm posted an update, I've mainly been sourcing and buying parts. However I've now finished the main part of the...

phil for the inner studs for the fuel tank mounts,same issue stud fouls on the fitting,i dremelled down and bought 3/8 half nuts worked...

Also I see you've made the same mistake as me as there is no way to fit a rivet here as I couldn't get the rivet tool in here :(...

Hi Phil, looking good, it's really interesting to see that your panels seem to be slightly different to mine (even the numbering looks...

It has been a few months, but I am making steady progress. More panel fitting and a few new parts. I now have two low pressure fuel...

My RCR GT40 mk1 finally arrived on Saturday!! No for the fun n games to begin........

Hi all. Recently XGT 03 caused a huge amount of attention by appearing at auction. However I would like to know where is XGT 01 (not...

Day 8/9 Masked chassis for spray on Raptor mixed with 15% reducer to smooth texture.

What does the shift linkage upgrade achieve?

Pictures of our dashes both LHD and RHD versions. Both are arrow straight along the dash top above the gauges. We invested large amounts...