door

Hi Everyone, The RCR MKII I got from Fran was to be a turn-key car for the previous client. Unfortunately, due to unforeseen issues the client was unable to complete the build. So I acquired the car with work already started by RCR. The client wanted the car as period correct as possible...

Can you give me any help or recommendations for a narrow bulb seal for the door edge? I have a "U" channeled seal now but the bulb is too large not allowing the door to seat completely.....

having a hard time adjusting door latches on my SPF 2116. spent many hours and my mechanic spent some too. thought i had it solved and then Fri. my son and i drove to Neptunes Net in Malibu for Pattie Melts and on way home drivers door kept opening at speed and a couple of scary times in a right...

I believe the B pillar on original GT40's was smooth and did not have the swage line of replicas. Was it smooth on the rear clip and the door as well (3 arrows in the picture).

Anyone got a good picture of how the door cylinders attach to the door and to the door jam? Can't find a picture in either the manual or the gallery. Want to make sure I get them properly aligned.

Door Eyebrows, as delivered in raw form from RCR. New, never used/mounted. $90, plus flat-rate shipping from Colorado. From RCR's site...."All GT40s have doors that cut deeply into the roof. At high speed, the doors tend to lift out of the body. These lightweight fiberglass "eyebrows" keep...

Bought an abandoned project.. Well, I have nothing to start with and need to buy all the required parts that are missing. What do I need. I have a GT Forté MK2 body with recesses for the handles. Where to get a complete set handles, catches etcetera that suits my needs. Also need door...

I have seen the mod to the exterior door handle to allow you to lock the car via a key tumbler, but has anyone figured out how to also use the interior Miata handle to also lock the door?

I am having problems locating a suitable door sea for my Chris Melia bodied Southern GT. The lip for the seal is around 5-6mm as opposed to 2-3mm for other bodies I have seen. I have tried COH Baines in the UK to no avail.

has anyone any experience with this company or their cable shifter setup for a gt40 1200.00 out the door trans adapter, cable and shifter for an ERA car zftrans lloyd

Hello folks, Does anyone have a drawing for the size and location of the opening for installing a vertical electric door actuator for the SL-C car? Thanks for your time.

Looking for a set of door boxes, any extras out there or is anyone currently making them? thanks -steve

Hi All, Does anyone have any original type exterior door handles for sale? Unfinished castings are acceptable. Regards,

For all you owners out there. I'd like to cut the roof of my Lotus Europa the way the GT40 is. They share much the same design in the doors except the roof cut out. The same head room problem getting in & out of the Lotus is I'm sure what prompted Ford to bring the door tops into the roof. The...

Sorry about the attempt to be smart.. If you've followed along with some of the other threads I've posted, you'll know that I wanted to do something different / special with the doors on my GT40. I wanted to implement some sort of system that would make the doors a bit more safer, solid and...