01E Torsen differential

[Cliff Beer]

Just wondering if the torsen diff in an 01E quattro ('93) is of any value. Specifically, is this diff adaptable to an 016 transaxle? I have a non-LSD 016 transaxle in my gt40 and I would like to improve the traction somehow without spending a whole lot of money. I can have this diff for free essentially.

Here's a link to the technical drawing: AutoZine Technical School - Traction

Thanks for any advice.

 

[Old Roaring Forties]

Hi Cliff, they are quite different unfortunately, we need to buy both for clients with 016 and others with 01E boxs and they aren't interchangable, appologies for the bad news ! Regards Paul

Just wondering if the torsen diff in an 01E quattro ('93) is of any value. Specifically, is this diff adaptable to an 016 transaxle? I have a non-LSD 016 transaxle in my gt40 and I would like to improve the traction somehow without spending a whole lot of money. I can have this diff for free essentially.

Here's a link to the technical drawing: AutoZine Technical School - Traction

Thanks for any advice.

 

[Brett James-McCall]

I have an 01X, could I use the diff in my box. Any thoughts?

Brett

 

[Cliff Beer]

Hi Paul, thank you, very helpful. You just saved me a bunch of time and energy wasting!

A related question: have you installed an 01E (this one is from a '93 Audi S4) in a GT40 with a SBF? Sounds like you have - is it a tougher installation than an 016 or about the same? And, does it use the same adapter plate at the 016 (made by Kennedy and others)??

Thanks Paul.

 

[Old Roaring Forties]

Hi again, We install both in our SBF cars using a common adaptor made to suit both 01E and 016, we just send a different fastener kit and on of the dowels is longer on 01E, I'm sure Kennedys would do the same - best to ask I think.
The shift linkages or cables are different in our kits (from the second link back), as is the rear trans mount, rear trans stabiliser bar kit, and we use a shorter driveshaft/axel on the LHS with 01E. The flywheel and clutch kit is also different so if you have parts to instal an 016, not a lot will be useful in your 01E install unfortunately,

Regards Paul

Hi Paul, thank you, very helpful. You just saved me a bunch of time and energy wasting!

A related question: have you installed an 01E (this one is from a '93 Audi S4) in a GT40 with a SBF? Sounds like you have - is it a tougher installation than an 016 or about the same? And, does it use the same adapter plate at the 016 (made by Kennedy and others)??

Thanks Paul.

 

[Old Roaring Forties]

The 01X we have here is uses the same center as 01E, ie different from 016, PB

I have an 01X, could I use the diff in my box. Any thoughts?

Brett