Printed in Aluminium
I have some of these that I am going to use for parts, as they are almost identical, I need to drill out the rivets, so they come apart machine off the ears and add a stainless bracket to the back, Well that is the plan.....very nice Brian, whats the plan for the rest of it.
Ryan, you will have to share some pictures. Always interested to see what other people have done?Sounds similar to what i was planing with mine, which are slightly different. Will get there in the end.
They are in my build diary. I have been a bit busy with a few other things and need to add some more details.Ryan, you will have to share some pictures. Always interested to see what other people have done?
Were your stainless back plates part of the lightning catch, or did you make them?I have the 'Press' part modified from a Lightning aircraft....
Sorry Andy, I don't, as Jimmy suggests my Sarma latches came of Ebay.com I think I paid $50 each but they might not fit your latches exactly?I got a batch of 16 and Graham got someone to put on the stainless backing plates, Graham has 8 of them and I gave 4 to a friend who is rebuilding a Mk III near to me and 4 for me (Im NOT building another one!!!). You don't have any spare 'latches' or a source for them??? I need 8....
Andy
hopefully. They won't be exactly right, but they should look pretty close.Those Sarmas will look good with the new PRESS buttons
I have some of these that I am going to use for parts, as they are almost identical, I need to drill out the rivets, so they come apart machine off the ears and add a stainless bracket to the back, Well that is the plan.....View attachment 110979