Tim Kay
Lifetime Supporter
Any SPF specific pics of 6 pt harness submarine belt mounts. Due to the SPF integrated seat support welded in place I am trying to find the correct location to bolt the submarine belts to the chassis and be relatively close to seat belt manufacturers recommendations.
The only option I see is to bolt through the light gauge floor plate with a backing plate but I'd rather not because a backing plate and bolt will reduce the chassis clearance and ultimately get banged about on gaters or speed bumps thereby deforming the light gauge steel flooring. IOW, bolts thru the floor affect clearance on the underside of the car and with only 4" inch clearance every bit counts.
I'm hoping to see if someone has fabricated a mount above the floor but below the seat support. There is a void area in that location that a mount may fit but I'm not sure this lines up the sub belts at the right angle suggested by the manufacturers.
Tim
The only option I see is to bolt through the light gauge floor plate with a backing plate but I'd rather not because a backing plate and bolt will reduce the chassis clearance and ultimately get banged about on gaters or speed bumps thereby deforming the light gauge steel flooring. IOW, bolts thru the floor affect clearance on the underside of the car and with only 4" inch clearance every bit counts.
I'm hoping to see if someone has fabricated a mount above the floor but below the seat support. There is a void area in that location that a mount may fit but I'm not sure this lines up the sub belts at the right angle suggested by the manufacturers.
Tim