Dimensions for Body Mount Points

Are there any published dimensions for the body mounting points on the MK1 GT40? My eventual endgame is to create a full aluminum body that I could bolt to a rolling chassis without too much fuss. I have a cad model of the body shell, but no data on mounting points.
 
I made an alloy body for mine, the spider has mounting bolts at the base of the A pillars. the front of the spider at the lower screen area is glued and riveted.
The front rear clips just swing of the hinges.
The doors swing off hinges mounted to the chassis.
My build is in the build forum RF105.

Jim
 
I made an alloy body for mine, the spider has mounting bolts at the base of the A pillars. the front of the spider at the lower screen area is glued and riveted.
The front rear clips just swing of the hinges.
The doors swing off hinges mounted to the chassis.
My build is in the build forum RF105.

Jim

Jim Thanks For the info.

That is almost exactly what I want to build. The only difference being I plan to form the shape near as finished as possible on rudimentary tooling, Probably with limited use rubber pad forms.

The car looks great in the white, Like it just rolled out of the original workshop.
 
Back
Top