For anyone who has already fitted the front inner fender wells, for the life of me I do not see how these things fit without cutting them to shreds.
The piece by the headlights worked with some trimming. The parts that came pre glued to the front nose (verticals) are not the same width as the inner wells so the wells were cut to fit.
However from the pictures below its the aft piece in combination with the pre-glued verticals that came installed that are my issue. I do not see the fitment picture. Do they also need a significant bit of cutting and trimming?
In my second picture below, you can see my confusion. The vertical pre-glued piece and the aft well part overlap a lot. So I must have something wrong.
A picture or two of your project would go a LONG way....thanks
The piece by the headlights worked with some trimming. The parts that came pre glued to the front nose (verticals) are not the same width as the inner wells so the wells were cut to fit.
However from the pictures below its the aft piece in combination with the pre-glued verticals that came installed that are my issue. I do not see the fitment picture. Do they also need a significant bit of cutting and trimming?
In my second picture below, you can see my confusion. The vertical pre-glued piece and the aft well part overlap a lot. So I must have something wrong.
A picture or two of your project would go a LONG way....thanks