GTD chassis/vin plate

Did GTD supply a chassis plate? if so are they still available from anywhere?
I'm NOT after a "FAV" chassis plate or anything that reads "FORD" I'm proud of my GTD and it's heritage so would like a GTD chassis plate.

Simon

If there's none available, are there any GTD owners who would like some made? I found a guy at the classic car show today who makes/designs them to order.
 
Hi Simon,

I have such a plate too on my GTD but would also like to order one if you find GTD ones.
I cannot remember there were GTD plates.

Rgds
Fred
 
Attached are an original,as supplied by GTD, GTD vin plate and an Enthusiasts Club plate. They can probably be copied and made buy most trophy shops. I have no idea who might have made or supplied them. The plates are 4" x 1 1/4" x 1/16". The rubbed out portion was pre printed with GTD40 and the rest was blank for stamping in the proper chassis number, which consisted of the actual chassis number plus the year of manufacture i.e.
GTD4020190. 201 being the chassis and 90 being the year.
 
Last edited:
Murray,

If you want , I can send you my replica tag so you have a real one to remake it if you want to.
Just send it back to me when done.

Let me know.

Rgds
fred
 
If anyone intends to make these black ones, pls ctc me as I would like to have one (urgently) for presenting my car to the 'local Dvla' in Belgium soon.
Tx
Rgds
Fred
 

Malcolm

Supporter
I suspect that a lot of GTD's did not get the GTD chassis plate as shown by Bud here. I have seen a lot of GTD's and not seen that one before! Agree with your chassis numbering though. Nearly all chassis were stamped though with the chassis number.
 
Gents, I too can generate these plates like the FAV, JWA, FoMoCo plates I already make. I can crank them out for $20 post paid. See my plates under the thread "Repo Vin Plates"
 
Hi Lynn,

Could you make 3 vin plates such us 40Bud showed in black and GT Development?
If you stamp them too I can send you my chassis number.

How long would it take to make them and I agree to ship trough express mode (I need them asap for Immatriculation purposes overhere).

Also let me know how I could make payement (paypal,Mastercard,transfer etc)


Tx
Rgds
Fred
 
Fred

These are pretty simple so I suspect I could do the artwork today and have them in tomorrow's mail (Tuesday). I'm not sure what Express postage to Europe is but I think it's about $15, I'll have to check. PayPal always works for me. Get me the numbers you want lasered in and I'll get on it later today. Contact me directly via email: [email protected].
 
Last edited:
Fred, thats really kind of you. I shall send a PM with my address when I get back from my holiday, wouldn't want to loose the item, by not being here. Thanks.
 
Lynn

Great !!!!


I would like 3 pieces and will pay trough Paypal upon recipt of your costs incl shipping.
Can yoy stamp them aswel.
If graved only 1 piece Chassis/ GTD40P1075

Tx
Rgds
Fred
 
Lynn,

Excellent GTD vin plates.

I went trough the local authorities and they accepted the plate as original.
Excellent work and great follow up.
Many thanks!

Rgds
Fred
 
Attached are an original,as supplied by GTD, GTD vin plate and an Enthusiasts Club plate. They can probably be copied and made buy most trophy shops. I have no idea who might have made or supplied them. The plates are 4" x 1 1/4" x 1/16". The rubbed out portion was pre printed with GTD40 and the rest was blank for stamping in the proper chassis number, which consisted of the actual chassis number plus the year of manufacture i.e.
GTD4020190. 201 being the chassis and 90 being the year.
Gents, I too can generate these plates like the FAV, JWA, FoMoCo plates I already make. I can crank them out for $20 post paid. See my plates under the thread "Repo Vin Plates"
 
Are you still doing the GTD VIN plates? If yes could you please send me a photo as I can't seem to find them here. Thanks

Tony Hess GTD-40
 
Top