Quaife bellhousing on Ford block

[Klaf]

Hi Bryan. I know this was a while ago but I have the same setup. Did you use a separator plate between your engine and bell housing?

 

[bryanf]

Hi Bryan. I know this was a while ago but I have the same setup. Did you use a separator plate between your engine and bell housing?

The bell housing bolts to the Ford 302 engine with no adapter plate.

 

[bryanf]

Hi Bryan. I know this was a while ago but I have the same setup. Did you use a separator plate between your engine and bell housing?

But of course you need the black plate shown in this pic:

 

[Klaf]

Is that a 157 tooth flywheel?

 

[bryanf]

Is that a 157 tooth flywheel?

Yes, McLeod 463100, 25 pound steel flywheel
https://www.summitracing.com/parts/mcl-463100

 

[Klaf]

Last question I promise. Where did you get the black plate? I have one from Summit but the holes are off 1 inch if I line up the started bolt holes

 

[bryanf]

It's a D9ZZ-7007-A block plate. I got it from Mustangs Plus, but they are closed now, owner retired. I did have to modify it to work with the Quaife bell housing.