My Quiafe QBE arrived today, it's pretty! What are you guys using for a hydraulic clutch slave cylinder and mount?
Quiafe QBE62G arrived today!! What are you guys using for a clutch slave cylinder?
- Thread starter Snaprolll
- Start date
Bill Kearley
Supporter
Soooooooooo nice. external !
Safir/Quaife Clutch fork Shaft
When using the ZFQ Quaife gearbox with the Safir Clutch kit, it is necessary to change the Quaife clutch fork shaft with the Safir/Quaife shaft. The Quaife and ZF/RBT shafts differ by the number of splines on the end over which the clutch lever is positioned. Safir makes the lever using the...
store.gt40.com
Clutch Slave Cylinder
This is the Girling slave cylinder used on the genuine GT40 serial numbered cars as well as many racing cars with small bellhousings. There are three bosses cast and machined into the bellhousing to perfectly align the cylinder with the clutch release lever. Three points define a plane. Two...
store.gt40.com
Clutch Release Lever
Plate J Items 47&38 Part # 1031/310/004 The original clutch release lever forgings are difficult to acquire. Our clutch release lever is fabricated from 16 gauge, laser cut mild steel plate, and draw-over-mandrel (DOM) seamless tubing. The 32 serrations on the clamp end are precisely...
store.gt40.com
I am amused that Quaife fits "tamper-proof" seals to prevent you from doing internal work, yet they offer NO warranty on the gearbox so.......
It's a standard Girling slave cylinder unit (as used on the Hewland MK9) with a 7/8" bore, R/H inlet (note, they come as R/H and LH inlet units). Your bell housing has the bores for the 2 mounting bolts (as seen in your picture) . I used a shim to make sure the cylinder push rod goes in straight and is of proper length. I use a modified adjustable push rod from the Jaguar E-Type (S1). Of course, you'll need to flip the clutch lever from the position shown in your picture ;-).
What is the warranty for a ZF box?Safir/Quaife Clutch fork Shaft
When using the ZFQ Quaife gearbox with the Safir Clutch kit, it is necessary to change the Quaife clutch fork shaft with the Safir/Quaife shaft. The Quaife and ZF/RBT shafts differ by the number of splines on the end over which the clutch lever is positioned. Safir makes the lever using the...Clutch Slave Cylinder
This is the Girling slave cylinder used on the genuine GT40 serial numbered cars as well as many racing cars with small bellhousings. There are three bosses cast and machined into the bellhousing to perfectly align the cylinder with the clutch release lever. Three points define a plane. Two...Clutch Release Lever
Plate J Items 47&38 Part # 1031/310/004 The original clutch release lever forgings are difficult to acquire. Our clutch release lever is fabricated from 16 gauge, laser cut mild steel plate, and draw-over-mandrel (DOM) seamless tubing. The 32 serrations on the clamp end are precisely...
I am amused that Quaife fits "tamper-proof" seals to prevent you from doing internal work, yet they offer NO warranty on the gearbox so.......
Thanks,
/s/ Chris Kennedy
Thanks for the info. Ordered them both.
Joel. who's clutch and flywheel are you using/?
[td]
[/td]
[/td]
[/td]
[td]
|
[td] McLeod Racing 6913-03 - McLeod RST Street Twin Clutch Kits |
[td]
Quantity: 1
[/td][td]
[/td]
[/td]
[/td]
[td]
|
[td] McLeod Racing 1507 - McLeod Flywheel Bolt Kits |
[td]
Quantity: 1
[/td][td]
[/td]
[/td]
[/td]
[td]
|
[td] McLeod Racing 16525 - McLeod Throwout Bearings |
[td]
Quantity: 1
[/td][td]
[/td]
[/td]
[/td]
[td]
|
[td] ARP 154-0903 - ARP Bellhousing Bolt Kits |
[td]
Quantity: 1
[/td]Lee Patterson
Supporter
which bell housing is that?
It's Ford / Chevy from Quiafe, I ordered with the Transaxle. Bolts right to my 351W based engine.
Similar threads
