Rear Lower Wishbone Inboard Bearing

[Brian Coombs]

Does anyone know what the rear lower wishbone inboard bearing are, and where I can get 2 in the UK.

Thanks

BC

 

[Ed McClements]

If it's a rod-end bearing, and you can measure the size (do SPF use Imperial or Metric sizes?) then the following can probably help:-

https://www.merlinmotorsport.co.uk/s/suspension-steering/rod-ends/national-rod-ends

https://www.demon-tweeks.com/uk/motorsport/suspension-steering/suspension/rod-ends-bearings/

http://www.mcgillmotorsport.com/rod-ends-bearings/

https://simplybearings.co.uk/shop/Bearings-Rod-End-Bearings/c3_4544/index.html?page=1


But read the attached to learn why not all rod ends / heim joints are created equal.

 

[Pedro]

Does anyone know what the rear lower wishbone inboard bearing are, and where I can get 2 in the UK.

Thanks

BC

Rexnord Shafer DAS10

 

[Brian Coombs]

Rexnord Shafer DAS10

Thanks Pedro, That is perfect.....

 

[David mono]

DAS10 is the bearing for the original cars. I suspect superformance used a different bearing.

 

[Brian Coombs]

DAS10 is the bearing for the original cars. I suspect superformance used a different bearing.

Thanks David, beginning to think it is an AIB 14T

 

[Pedro]

Thanks David, beginning to think it is an AIB 14T

Yes, DAS10 was used on the original cars.

 

[David mono]

Cobra Valley is selling a coil over upgrade and it comes with 12 mm bearings or 1/2 if you changed from the 12 mm . The bolt that goes through the shock and the A arm are the same bolt . So The front A arm bearing is 12 mm bore , just to guess the rear is probably metric as well 15 mm bore?

 

[Pedro]

https://www.radwell.com/en-US/Buy/SHAFER/DAS1031A?redirect=true