I am resurrecting a motor I built some time ago and want to lose some compression. The piston I used was TRW L2249 which is about 10.0 cc dome. I would like to lose about 5.0cc from the dome by milling them . Has anyone ever done this or does anyone know how much can be safely milled of them???? Probably will improve the flame travel also !
The rest of the 302 combination is D00E 351W heads with 1.98/1.6 valves and I am aiming for about 9.6:1
The rest of the 302 combination is D00E 351W heads with 1.98/1.6 valves and I am aiming for about 9.6:1
