Latest activity

Hello together we had a nice weekend at the Lenzerheide classic. Was fun to drive there. Greetings from switzerland :)

makes me think of Carl Perkins with ``honey don't" :)!

Who wants a left hand drive car. I think only three MKIII were made with left hand drive

Mine just fit, so I think I'm a lucky one on this or maybe AK have changed the pattern slightly. I am definitely planning on putting...

Lieber Markus Ich bin sehr an deinem Set Hartwell latches interessiert. Sind diese noch zu haben? Freundlich Grüsse aus der Schweiz...

Ok, thanks for the further info. I'll contact Vintage Air and see if they'll do that, but if not, I had plans to 3D print a custom...

Hello together we had a nice weekend at the Lenzerheide classic. Was fun to drive there. Greetings from switzerland :)

Mine just fit, so I think I'm a lucky one on this or maybe AK have changed the pattern slightly. I am definitely planning on putting...

The only thing custom about RCR supplied unit is the forward box is uncut.....meaning there is no outlets installed (it's blank). Ask...

I searched plenty. However I looked for the “Gen 2 mini” as that was the name I knew. If I don’t know the right unit I don’t know to...

It's great to hear the museum has reopened. Thanks for sharing the photos;) Much appreciated!

This picture shows exactly where it mounts. It's mounted below the aluminum panel...rather than above as shown in picture. There are...

After my F up buying the Mini I measured the passenger side footwell width, it’s slightly over 14”. I looked at the slimline, it says...

I have adapted a caman transaxle with the internal shifting improved . For more durability. Ford 427 aluminum shelby engine.

The cars previously came with the Vintage Air Slimline units. The vent boxes were uncut.....meaning no air flow outlets were factory...