Now that I have the interior tub in place, I am mocking up the complete interior to fine tune the fit of the tub and to get all of the parts ready for powder coating, upholstery or whatever covering they will need.
With the seats in their final position, the pedals in their position and the tub level of the flooring set, I really had a hard time with the height and angle of the accelerator pedal. I have a layer of Luxury Liner Pro under the tub, but also added a layer on top of the tub in the foot well of the driver and passenger area, in part to reduce the relative height of the accelerator pedal. It was still too high, so a modification was in order.
I wanted to use the supplied foot pedal, but it needed to be lower and at the angle of my foot in a driving position. With all of the flooring in place, I measured the distance from the heel of my shoe to the ball of my shoe and set the pedal height as that distance off the floor height. Tried it out, and that is the right position. I will have the exposed aluminum powder coated with the other interior support pieces.
I added the foot rest that I previously made, so the driver side foot box is complete.