Superformance Halibrand style wheels

Brian Stewart
Supporter
My current wheels will likely not fit under my MKII rear bodywork. Does anyone have a set of 8" and 10" GT40 MKII Halibrand style wheels from Superformance they could run a rule over so I can see if they would make a suitable alternative?

The measurements I am after are labelled A - N on the diagrams below.

Thanks,

Brian.


Rear wheel.jpg
Front wheel.jpg
Side elevation.jpg
?
 

Markus

SPRF40
Lifetime Supporter
Hello Brian,

I have a spare set of wheels for my Superformance MKI which are Halibrand style.

They should be 8" and 10"

I have to dig them out of the basement and can measure them tomorrow.

What I do not know is if Superformance has a differences betwen MKI and MKIIwheels?

Regards
Markus
 

Brian Stewart
Supporter
Thanks Marcus. As I understand it, their Mk I wheels are BRM style, while their MKII wheels are Halibrand wineglass style.
 

Rick Muck- Mark IV

GT40s Sponsor
Supporter
The "Wineglass" type Halibrands supplied by Superformance are the same for either MK I or MK II application. On a SPF MK I you may choose either the "BRM" six-spokes or the Halibrands. I have a set of the 8 & 10" Halibrands available but not at hand to measure. The pin dimension and PCD are the same as the original cars and most of the currently available GT40 wheels.
 

Markus

SPRF40
Lifetime Supporter
Hello Brian,

here we go - in the .pdf you find the measurements.
Please check if everything makes sense to you.
If you need additional measurements / pictures let me know.
Some measurements are not exact and are marked with "ca."
 

Attachments

  • SPF wheel dimensions - MKII Halibrand style.pdf
    282.3 KB · Views: 271
Last edited:
Back
Top