016 vs 01E

What is the best between the 2, I have a 016. Is the bolt pattern the same between the 2. I have a gilo adapter plate, but it's for the windsor motor. I will be using it on a coyote so will need to do a new adaptor plus flywheel. Just need to know is it worth it to use the 016 or must I look at the 01E
 
Thank you Jim, so with that being said looks like I have a massive paper weight. Do you maybe know if the bolt pattern between 016 and 01E is the same
 

Jim Dewar

Supporter
Thank you Jim, so with that being said looks like I have a massive paper weight. Do you maybe know if the bolt pattern between 016 and 01E is the same
Mine wouldn’t work, ordered a new setup from Kennedy engineering.
 

Randy V

Moderator-Admin
Staff member
Admin
Lifetime Supporter
016 bearings are not available worldwide, I discarded 3 016 boxes and changed to 01E.

Did you try contacting a bearing house directly with the numbers and measurements from your bearings?
I have done this successfully numerous times in the past - but it has been a number of years…
You might also check mcmaster.com
 

Jim Dewar

Supporter
Did you try contacting a bearing house directly with the numbers and measurements from your bearings?
I have done this successfully numerous times in the past - but it has been a number of years…
You might also check mcmaster.com
Yes , I contacted the bearing distributors direct and pinion bearings are no longer manufactured. German transaxle in Washington state told me this and I went to European suppliers and received the same results.
 
Back
Top