HI there
We need urgently the knock sensor section of the Coyote engine wiring harness. This is a very short section that plugs into the main engine harness and connects the two knock sensors to the engine harness.
We have been unable to source this missing sub-harness here in Australia and wonder if any of you (probably those of you in the USA) could offer any assistance in locating one of these, or maybe offer some suggestions as to where we could try to get one. Even if we could get the connectors, we could make one.
I have attached some photos which show the complete section, the FoMoCo part number and some closeups of the connectors (two 2-way and one 6-way required).
Thank you...
Bill
We need urgently the knock sensor section of the Coyote engine wiring harness. This is a very short section that plugs into the main engine harness and connects the two knock sensors to the engine harness.
We have been unable to source this missing sub-harness here in Australia and wonder if any of you (probably those of you in the USA) could offer any assistance in locating one of these, or maybe offer some suggestions as to where we could try to get one. Even if we could get the connectors, we could make one.
I have attached some photos which show the complete section, the FoMoCo part number and some closeups of the connectors (two 2-way and one 6-way required).
Thank you...
Bill