difference in dash1 and dash2 ZF

[chuck smith]

what are the differences, and is a Dash1 ok for a 40? thanks; chuck

 

[Doc Watson]

I think a ZF-1 has 4 hole mounting for the gearbox to the bellhousing and a ZF-2 has 6. The photos show this.

Also the -2 was 'beefed up' to take a little more punishment. I dont know if any external measurments are different. Also the ZF-1 is rare and spares will be harder to come by.

Anybody else?

Andy

 

Hi guys
Sorry to contradict but the -1 has larger input and output shafts

regards

Chris.

 

[David Briggs]

I believe the dash 1 has very close ratios with a lower 5th gear, the case has some external stiffeners between the bellhousing and trans(on a Pantera). the input shaft is too long. A Mangusta used a dash 1 that was oriented the same as a 40 but used a deeper bellhousing.

 

[chuck smith]

thanks guys. Next question, what mods need to be made to a BMW M1 ZF to mate to our 40's? chuck

 

[Russ Noble]

Chuck,

Is this post by Ross Nicol the sort of info you are looking for?
http://www.gt40s.com/forum/gt40-tec...4657-18-months-zf-transaxle.html?highlight=18

Cheers,