Ford H Craft GT-R

[Joel K]

Very nice work Jack, car looks phenomenal.

 

[Jack Lanphere]

Thank you for your comment

 

[Jack Lanphere]

Very nice work Jack, car looks phenomenal.

Thank you for the comment

 

[Jack Lanphere]

Hello
I just put on my HRE’s. I’m having caps made that Have GT-R on them. Fitment is special. Rears are 345/25ZR20”x 12.5”, ET of 54mm. Fronts are 285/30ZR19 x 10”, ET of 32mm

The car is on blocks but settles in nicely with tires

 

[Jack Lanphere]

Here is the diffuser completed

 

[Jack Lanphere]

Final pic of installation with delete plate stalled behind bumper above lower grille and below license plate grille, painted to match car color.

 

[Jack Lanphere]

Started install of recessed rear marker lights

 

[Jack Lanphere]

Here are the linear actuators in action.
The actuator mount point at the bottom bolt point has a rotation hinge that delays the beginning of the clamshell lift by 1.5 seconds so the actuators up at the latch can pull back the secondary hooks that prevent the clamshell from blowing open while the car is in motion. You can here the delay that identifies the actuators are in motion but no movement

 

[Brian Kissel]

Not sure if a video was supposed to be included, but I only see a picture.

Regards Brian

 

[Jack Lanphere]

Haven’t figured out if you can post a video
I don’t see a way

 

[Brian Kissel]

Not positive, but I think you need a host like YouTube or something. Hopefully Randy will read and chime in.

Thanks
Regards Brian

 

[Randy V]

Not positive, but I think you need a host like YouTube or something. Hopefully Randy will read and chime in.

Thanks
Regards Brian

Video apparently needs to be hosted offsite see attachments…

 

[Jack Lanphere]

I finished the heat shield and resonator box installation.
Next are the air jacks.

 

[Tim]

Jack welcome and congratulations on a beautiful car. H joined us for a GT get together and mountain drive while he worked there in 2019 and opened the shop up to us for a visit. I think he had just finished the car then.

David

I was there too for that drive in 2019! Awesome car, looking forward to seeing it again.

 

[Jack Lanphere]

Thank you for your comments
Been working on her steady for about a year doing many things that I felt the car should have.
No questions its a special car and blessed to have her.

 

[Jack Lanphere]

This is the finished heat shield and resonator box. The air boxes for the intake have been modified to receive the clam shell now 100% seal.

 

[Jack Lanphere]

I have installed a lockable lever handle to open the frunk. These are progress pics

 

[Jack Lanphere]

Final fitment complete and ready to clear gloss paint touch up.
Getting ready to install my carbon fiber side air scoops.

 

[Jack Lanphere]

Lock assembly is in and functional

 

[Jack Lanphere]

Started install of recessed rear marker lights

Here is an update on the marker lights
Ready to clear the blue base color on the touch up