Front Suspension Upper and Lower Control Arm Bearings

F

FMS

Guest
Need to purchase a complete set of bearings for Right and Left side upper and Lower control arms, along with ball joints. This is for an original GT-40 we are restoring. Any help would be greatly appreciated. [email protected]
 
Fms,
this info may help
Front wishbone bearings (Top and Bottom) 1.1/16" O.D.x 13/16" wide. 1/2" bore. Part no. BR-8-R or RSTNR-16E

Inner rear wishbone - 1.15/16"O.D x 1.5/16" wide. 5/8" Bore.

Inner top link and lower outer wishbone bearing 1.3/8" O.D x 5/8" bore. 1.1/4" ball width. Part no. BLFR-10-045 or RA10

You will probably be able to locate from an automotive bearing supplier.

The second part no. is a Rose Bearing no.

Mail me for the rod end bearing dimms if yo need them.
Hope this helps
 
Back
Top