Fuel Vents

[Adam C.]

We completed a small batch of MKII fuel vent assemblies.

MKII Fuel Vents

Fuel vents mounted on the cowl of MKII vehicles. A semi one-way design that allows air to freely enter/exit the bladders at low flow rates. The threaded cap is an improvement over the epoxied version used on MKI, providing a more robust assembly while allowing service and cleaning. Fits MKI...

llamabite.com

We're looking at making the MKI epoxied and Gulf piston/spring versions as well.

Please reach out if you're interested in either of those versions so we can prioritize and build the proper amount.

Thanks all,

Adam

 

[Adam C.]

Gulf version is in production. Price will be similar but I’ll give a 20% discount to early birds. Reserve your spot!

 

[Adam C.]

MKI Version is in production.

 

[Adam C.]

MKI Vents are now available!

MKI Fuel Vents

Fuel vents mounted on the cowl of MKI vehicles. A semi one-way design that allows air to freely enter/exit the bladders at low flow rates. The unit is epoxied closed and therefore non-serviceable.Patterned from pieces made during restoration of an original MKI, so could be considered...

llamabite.com

 

[Randy V]

Beautiful work Adam!

 

[Adam C.]

Gulf Vents now available!

Gulf Fuel Vents

Fuel vents mounted on the cowl of Gulf vehicles. A one-way design that only allows air to enter the fuel tanks. These vents should not be used alone, as the bladders could become pressurized. On Gulf vehicles, outlet valves were mounted at the rear of the vehicle. Copied from a piece made...

llamabite.com

 

[Neil]

Gulf Vents now available!

Gulf Fuel Vents

Fuel vents mounted on the cowl of Gulf vehicles. A one-way design that only allows air to enter the fuel tanks. These vents should not be used alone, as the bladders could become pressurized. On Gulf vehicles, outlet valves were mounted at the rear of the vehicle. Copied from a piece made...

llamabite.com

View attachment 133013

They would look good anodized Gulf blue!