Hello fellow enthusiasts

[Mark Dritt]

Hello all! I am a new member here from Indianapolis. I am still in the beginning stages of planning my build, although I have wanted to do this for many many years. So far I intend to buy an RCR kit, but any input is appreciated. I would like to build a 68/69 Gulf MK1 car with some minor improvements. I also would like to top off the engine with a set of Gurney Weslake heads, any leads on a set would be appreciated also.
Thanks, Mark

 

[Randy V]

Welcome to GT40s.com Mark.
Gurney Weslake heads are pretty rare & expensive...
Perhaps just the Valve covers would do the trick?
This is the engine I built for my GT...

 

[Mark Dritt]

Randy, I have considered that option and will go that route if necessary. I would willingly purchase a set of bare or incomplete Gurney Weslake heads, and would also consider some Gurney Eagle heads for the right price. I really only need a set of bare heads and valve covers to do what I want to do.

 

[Andy Sheldon]

Mark

We have Weslake and Eagle covers in stock

Thanks

Andy

 

[Matt A]

Hello all! I am a new member here from Indianapolis. I am still in the beginning stages of planning my build, although I have wanted to do this for many many years. So far I intend to buy an RCR kit, but any input is appreciated. I would like to build a 68/69 Gulf MK1 car with some minor improvements. I also would like to top off the engine with a set of Gurney Weslake heads, any leads on a set would be appreciated also.
Thanks, Mark

I have a set of Gurney Eagle Heads with valve covers that I would sell. I don’t have a price yet, one needs some work, feel from to email me if you want more info [email protected]

Randy, I have considered that option and will go that route if necessary. I would willingly purchase a set of bare or incomplete Gurney Weslake heads, and would also consider some Gurney Eagle heads for the right price. I really only need a set of bare heads and valve covers to do what I want to do.

i have some Gurney Eagle heads they need a little work but are over all solid

 

[simon]

Can you advise if these heads are still available or not?

 

[Brian Kissel]

Simon, he hasn’t logged in since 2020. His direct email is in the post above.
Regards Brian

 

[simon]

OK missed that thank you Brian.