Jacking the frame

[Alex]

Can you jack the frame anywhere, or are there only certain points, otherwise you might puncture through it?

 

[Doc Kaler]

Alex,

The side aluminum square channel tubing is quite strong and should work.

 

[Dave Lindemann]

Alex -

I've jacked my SLC up (chassis & body only) from the rear suspension and the entire side lifts off the ground. I don't know of any point on the chassis where it could be "punched through".

Dave L

 

[Randy V]

Alex -

I've jacked my SLC up (chassis & body only) from the rear suspension and the entire side lifts off the ground. I don't know of any point on the chassis where it could be "punched through".

Dave L

If the SLC chassis is anything like my RCR40, I think you could put a jack anywhere and not only would you not punch through, you wouldn't be able to even put a ding in it....