I have a rebuilt 86 944 turbo transaxle. Never installed, no fluids except during assembly.The following was done to make this a high HP strong box-- in 944 land--5-600 crank HP.
LSD porsche disc type
5th gear from early model porsche cruise RPM 1800 top speed about 180 mph with enough HP
Ring and pinion REMed micro polished and the sharp edges on the teeth where broken by the vendor after polishing to ease engagement
Jim Dinner plate added for strength--- I used laser cut stainless steel
This is a 1 inch 23 spline input shaft. Many Ford and Chrysler clutches will fit. Spec makes many clutches for this spline.
Any interest ?
Thanks
LSD porsche disc type
5th gear from early model porsche cruise RPM 1800 top speed about 180 mph with enough HP
Ring and pinion REMed micro polished and the sharp edges on the teeth where broken by the vendor after polishing to ease engagement
Jim Dinner plate added for strength--- I used laser cut stainless steel
This is a 1 inch 23 spline input shaft. Many Ford and Chrysler clutches will fit. Spec makes many clutches for this spline.
Any interest ?
Thanks