Mike Pass
Supporter
Build yourself a real screamer. Fabricated fuel injection manifold for small block Ford.
NOTE: Needs Yates/Nascar type heads. Will not fit normal Windsor heads.
Built with 8 Cosworth GAA butterflies and trumpets. Has fuel rails, injectors and throttle pot. Ports are 2” x 1.5”. Throttle bodies 1.875”
The manifold and engine were originally built by Tom Laffey and fitted to his aluminium honeycomb chassis race GT40.
The manifold was originally fitted to a 4.4 litre de-stroked race 289 SBF. This engine did 525hp on the dyno at EDA. Should do even more on a 302 or larger. Offered on the forum before I post it on Ebay etc.
£800
Collection to be arranged by buyer. Item is located in Oldham, Greater Manchester UK.
Cheers
Mike
NOTE: Needs Yates/Nascar type heads. Will not fit normal Windsor heads.
Built with 8 Cosworth GAA butterflies and trumpets. Has fuel rails, injectors and throttle pot. Ports are 2” x 1.5”. Throttle bodies 1.875”
The manifold and engine were originally built by Tom Laffey and fitted to his aluminium honeycomb chassis race GT40.
The manifold was originally fitted to a 4.4 litre de-stroked race 289 SBF. This engine did 525hp on the dyno at EDA. Should do even more on a 302 or larger. Offered on the forum before I post it on Ebay etc.
£800
Collection to be arranged by buyer. Item is located in Oldham, Greater Manchester UK.
Cheers
Mike
