01X and 016 Axle Question

[Max]

Can I put 016 output flanges into an 01X?

I'm putting an 01X into a 944. Don't own a GT40 but I found quite a bit of useful info on this site. Thanks!

 

[Eric A.]

Call Scott at Advanced Automotion, he will know.

 

[Brett James-McCall]

Why not make up adaptors? That's what I did for my 01X

 

[Max]

Thanks for the info. I still need to make an adapter to correct for the passenger side offset, however the drivers side appears too tight for an adapter - unless the half axle was shortened.

 

[Brett James-McCall]

Here's the rough drawings I did for mine. I run 100mm CVs on each end. The shafts I had made were 16.5 in

Brett

 

[Scott]

Can I put 016 output flanges into an 01X?

I'm putting an 01X into a 944. Don't own a GT40 but I found quite a bit of useful info on this site. Thanks!

Nope they are something different entirely.