Nope, grid spacing is probably 400mm. Atleast when scaled to 400mm most other dimensions add up with fav drawings, wheelbase etc. and alot of other details seems to be correct (ex the angled axis between pivot points to create anti dive).I have no idea where they came from.
The grid used in the files does not appear to be consistent with the 10" grid used throughout the rest of the files.
Cheers.They are cad drawings from when Ray Webber was making chassis based on a CCD chassis imported from NZ.
Is this the Mirage chassis that @JIMMYMAC and Alistair are using?They are cad drawings from when Ray Webber was making chassis based on a CCD chassis imported from NZ.
Cheers.
Any idea how accurate or inaccurate they might be?
They are cad drawings from when Ray Webber was making chassis based on a CCD chassis imported from NZ.
Guess we just went back to start againThose GAs are not Ray's CAD drawings. We have a set of drawings that he and Steve made including the press tooling and his complex jig table.
I am at the point where i can get all pivot points and main elements within a few mm, pretty confident that i could have a complete and correct 3d model in solidworks with flat patterns etc. I have done a few alterations to facilitate cnc cutting and bending but kept main dimensions.I take my hat off to anyone that has a go. It takes an inordinate amount of time to understand the chassis, and another inordinate amount of time to work out how to construct it and get it close to accurate with the drawings and tooling you have available. It is fun though. Its not something that someone can say "do it like this or that" because everyone will have different skills/space/tooling. There is stuff your just going to have to go though and work out for yourself.
Yes, I found an ad on eBay where the same is stated. If you look at the elevation view you can see some markups for example to raide the cutout for radius arms.When I bought my drawings the write up said the two cad files were from Ford Racing Division and are 100% accurate.
If someone is in possession of information/drawings/something that might be handy I'm interested...
Yup, there are quite a few drawings to choose fromI have been looking at these plans for a while now and cant remember what I have and where I got them from. I have found that if I have asked for specific information about a particular panel, then I have had better luck as it helps locate the drawing that someone may have.
There were some excel files getting around that had drawing lists in them. There are probably still more drawings out there.