Chris Kouba
Supporter
Is it this one?
If not, please advise where it is.
Thanks!
If not, please advise where it is.
Thanks!
Griffin?, these guys are talkin ZF's, or is Griffin playing with ZF as well.I talked to Griffin, they remove the oval cover on the drivers side and they said fill to that level, mine took 2.8 ltrs.
You can run a remote breather off the port where the brass vent screws into. It's a 1" port, just wondering if an aluminum NPT fitting is the way to go as there are a lot of options there, not many with a straight pipe threadNot NPT. If you like ,tap and run a remote breather.
So you have a ZF or RBT 5 speed, but did you get it from De Lynn ( Griffin?) as some of your previous posts suggest? No skin off my nose, not interested in buying, just trying to get a clear pic of what you actually have!Jack, It looks like I have the same box Chris has pictured above. It is a 5 speed, not the new box that is pictured on their site ( I think is a six speed )
I understand there is a wait for the RBT 5 speed. If you are shopping for one make sure you get a front bearing support that works for your application.