Had to make new covers for the headlamps because the hole spacings didnt suit me for the alloy body.
I had not done this before but was not that hard, thought I would put it up as it may help others.
I decided on PVC as it is easier to play with ,less brittle and has moderate UV stability.
Firstly I made 4 dies they are 1.6 alloy ,I just wheeled them and did some bending and tweaking till they fitted.
This is a shot of one lower lamp cover die.
I had not done this before but was not that hard, thought I would put it up as it may help others.
I decided on PVC as it is easier to play with ,less brittle and has moderate UV stability.
Firstly I made 4 dies they are 1.6 alloy ,I just wheeled them and did some bending and tweaking till they fitted.
This is a shot of one lower lamp cover die.