MK II Body Panels

[Mike Dozier]

Chris

Glad to hear that you're close to offering
MK II rear clips. How about the front?

Is the only difference between MK I
and MK II the raised wheel arches?
Or are there other differences?

I was wondering how easy/hard it would be to modify an existing MK I nose to match
the MK II.

Thanks
MikeD

 

Hi Mike

The MK11 front came from the MK1 after it was noticed that the tires on the heavier cars, especially on banked tracks were rubbing through the tops of the front fenders.
to start with they cut holes in the fenders above the tires as a stop gap. Then they raised the profile by around two inches.

Regards
Chris

 

[Mike Dozier]

If that's the only difference, maybe someone create e a mold and make arches that can be grafted onto an existing front clip?

Or is that too difficult and an all new front clip is the only way to make it
look correct?

MikeD

 

Hi Mike
I would say that is a good option, I already have wider original MK1 rear arches that extend the narrow original MK1 rear clip to the wider MK1 style.
So yes it could be done to the front fender profile.

Regards
Chris.

[ May 27, 2003: Message edited by: Chris Melia ]

 

[Bob Putnam]

The MK2 radiator opening is also wider by about an inch.

 

[Mike Dozier]

Thanks Bob.

Makes sense considering the additional
cooling requirement of the 427.

MikeD