need some measurements on a crank pulley

[dave harris]

If someone has an original ford metal crank pulley (two groove) I would greatly appreciate it if they could measure the "height" of the pulley from the face that mounts on the crank to:

1) inner edge of first groove
2) outer edge of second groove

Thanks in advance for the assistance!

Dave Harris

 

[Rick]

Here you go Dave:

1. 1.575" Mounting surface to inner edge of rearmost V belt groove
2. 2.850" Front edge to back mounting surface

The Locating ring is 2.280 OD X .120 deep step(measuring away from mounting surface) ID is 2.150

 

[dave harris]

Thanks Rick!

Dave