I am about to add an oil cooler to my GTD. I thought to put it on the engine sill on the left hand side (my fuel pumps are down with the tanks so I have space).
I intend to angle it best to take the airflow from the rear side vent and maybe even put some ducting in to direct the flow more.
Sizing: if I use a Mocal cooler (from Think) any suggestions on the size. They come in two widths 115 or 235mm wide - I think I have to go for the latter. Also then a number of rows.
I have seen oil coolers near the gearbox but I figured that the air from the side vent might be cooler.
Any advice would be welcome.
David
I intend to angle it best to take the airflow from the rear side vent and maybe even put some ducting in to direct the flow more.
Sizing: if I use a Mocal cooler (from Think) any suggestions on the size. They come in two widths 115 or 235mm wide - I think I have to go for the latter. Also then a number of rows.
I have seen oil coolers near the gearbox but I figured that the air from the side vent might be cooler.
Any advice would be welcome.
David