Southern GT parking brake bracket MC4

[Davidmgbv8]

Has anyone got a pattern to mount a MC4 parking brake on the Southern GT rear upright.
Thanks

 

[Morten]

Hi David,

Brackets like these?
They’re stacked on Mick’s shelf, but not for long as all stock will be packed up and moved to the new owner’s workshop. Its also some shims you might need

Give Mick a shout before its too late to get the parts.

 

[Davidmgbv8]

Thanks Morten, I have a couple of bits I am awaiting to be sent so I will see if Mick can add this. Of more importance, Friday night I tried to figure a way to to orient the arm assembly to allow a straight pull of the hand brake lever vs reverse. Do you or any other SGT builder have a photo of the MC4 parking brake and the cable/ actuator arm in place.

 

[Morten]

I’ve seen some swap from trailing to leading caliper mounts which gives a straighter handbrake run. But if the handbrake cable is long enough then, thats another question.

I have Brembo handbrake calipers. Solution was to cross the cables under the engine Left to rightside, Right to Leftside onto the bar for a nice direct pull. I also made the bar longer.

morten