I'll try and measure it out for you tonight
mark
mark
I love those wheels. Probably the same ones shown in Casey Putsch’s video when he visited Ardern’s shop.Wheels. I am running BRM style wheels from Imagewheels.co.uk I had them made to the specs Chris gave me. He provides Halibrand style wheels with his roller kit and they are made to fit his chassis and the corvette brakes. My car goes back to him for the body in a few weeks, and he will look at my wheels and see if they can be an optional item in his roller package. No spacer was required, and don't think chris uses one either.
View attachment 111442
stack
I tried every which way to put on the normal coyote intakes. I hade 3 different ones on there and unless it points forward i thought it would be to close to the exhaust.Did you decide to go with ITBs because there wasn't a good way to use a normal intake? I've got my kit from Chris on order and I'm trying to decide how I should approach the coyote intake. Chris used a cobra elbow and a bump in the firewall but I'd like to avoid that if I can.
Also, have you made any more progress?? I read all you guys active power builds religiously.
I tried every which way to put on the normal coyote intakes. I hade 3 different ones on there and unless it points forward i thought it would be to close to the exhaust.
I had the same issue....if I hadn't gotten my ITBs to work, I was planning to run something like the Holley side mount manifold, then either route the filter to the side inlet scoop or under the car.
View attachment 114218