very little clutch clearance 930/SBC

[Andrew Robertson]

Hi All,

running sbc and 930 box, adapted using a complete set-up from Kennedy consisting of adaptor plate, clutch and flywheel. Looks really tight in there - is it normal? I'd prefer to see 5mm or so.... I've only got about 50 thou with the crank at the rearward limit of float.

Thanks, Andrew

 

[Terry Oxandale]

This is exactly the same situation with my LS/930 adapter kit as well. Very close!

 

[flatchat(Chris)]

You'll be good to go guys, this is German precise, specific engineering --if they specify 1/1000 mm as clearance --they mean it --not like that other agricultural "engineered" products that need 1/2" clearance :laugh:
The only thing of concern would be debri of the roads - that will wedge them selves between the small clearances, ie. use some fine mesh screening over apertures

 

[Stephen Tonks]

Wow 50 thou. That much !! Anything on GT40 that just misses is good to go.

Stephen