set

This is a full set of Avon CR6 ZZ used tires from my Superformance GT40. Fronts are 215/60R15 (date code 2608) and rears are 295/50R15 (date code 0308). There is 6/32" tread depth remaining on all four. They have no signs of cracking or checking. They would make a good set for a rolling...

Due to a forced cancellation, I have a pair of admission tickets for the full weekend, including paddock, available for sale. I can split and sell one set only if there is interest. Also available is a GT40 area parking permit for the full weekend.

Just an FYI out to the community. I’ve been discussing the different options for gearing on the Graziano with John B. For my needs I am going with a .903 drop gear set which is a custom order. So, if anyone is interested in that specific ratio please reach out to him since the order is going in soon

I am looking for a set of 18x13 and 18x 11 CCW (Corsair C10) wheels for my GT-R . Is there anyone who has a set who may consider selling them? Thanks, Ron

It's been about a year since I started offering drop gears for the Graziano (Graziano Gearing and Drop Gears) - multiple installs and feedback has been great from those who have driven cars with them installed. The one shortcoming of the 1.038 set, however, was the lack of a true overdrive gear...

Because of a downgrade to 15"" I´m selling my 17"" wheels, 8,5 and 11,5 width with 225/335 tyres. alloys are looking used and need to be refurnished, tyres must be replaced looking for 1800€ for the set

Bought an abandoned project.. Well, I have nothing to start with and need to buy all the required parts that are missing. What do I need. I have a GT Forté MK2 body with recesses for the handles. Where to get a complete set handles, catches etcetera that suits my needs. Also need door...

I wasn't sure which way to go with wheel diameter with my RCR build, so I bought both sizes. I ordered these through Vintage Wheels and had the rear 17" wheels widened from 10" to 12.5"sets. That modification alone was over $1850 for the rear wheels, the Weldcraft's widening process, and...

If anyone needs a set of side mirrors as supplied with the SLC kit, I have a set available that I didn't use (I adapted Corvette mirrors to my car). I have no idea what they're worth; If you need a set, for a reasonable price they're yours.

I’m planning my build. I pick up my chassis in 2 weeks and I’m trying to get the basics in place. Very excited. The chassis is set up for a Coyote engine, but I’m still determining which engine to choose. My frame is set up for a Porsche 996/997 transmission so that’s decided. I...

Hello I know this subject has been covered before, but I think unresolved. I would like some winged Dzus fasteners but I know you cannot buy them. I can make them myself if I had the dimension of the wing. I have not been to any period race meets in the last few years otherwise I would have...

Does anyone know where I can find dimensions and angles to build a set of 180 degree headers for a GT40?

Hat (Bell) Mount Rotors (SOLD) I have a set of four lightweight brake rotors available for US sale. These are RCRs "OEM" rotors found on the GT-40 using the Wilwood hubs. Two are brand new, only mounted in the garage for mockup, and the other two have less than 100 miles on them and are not...

For sale, part worn Avons. £300 set. Sussex. 07774 641017

I've just got a gasket set for my 302 (Mahle HS3530VJ) I can't seem to find any info online wether they are compatible with the edelbrock performer ally heads I've got - any one used this set?

Looking for a set of door boxes, any extras out there or is anyone currently making them? thanks -steve

I have a full caliper and rotor set from a very low mileage 2010 Camaro SS. The car was converted to a race car from new so the rotors and calipers have around 250 mi. I added them to the inventory planning (potentially) an SLC project but it looks like that isn't going to happen after I...

Hello Fellows, I decided to part with my RCR Carbon Fiber Seats which I received with my kit. New and unused, brackets included. Asking $600.00 for the set plus shipping. Please PM me if you are interested. Cheers

Hey guys, I think its time I started a thread for the uprights and stuff I'm making for my car and other guys that have seen my bits and pieces. I started way back in 09 when I made rear/front uprights for my M20 project. Along with transaxle I have had uprights cast and John has got 2 sets of...

I'm looking for a set of 17 " pin drive wheels if anyone has a set for sale or knows of one please PM me. Thanks, Bob