Carbon GT mono

Urs

Supporter
Hello together.
Last monday we were on the racetrack at anneau du rhin :) was very exciting . The material could surely drive faster ;) was also the first time on racetrack for me ...
We also get a new set of wheels made by RCR thanks to Fran for the nice work. The front wheels are now 4kg lighter per wheel and the rear wheels are 7kg lighter per wheel . Thank you Fran
And greetings from switzerland
 

Urs

Supporter
Hello together.

Last Monday we were on track again. First Time with slicks and the light wheels of RCR.
Was really nice , now we have to solve a little problem with the ZFQ which is spraying out the oil and then is getting very hot.It could have something to do with the pump which not really work fine.

Here some pictures.

Greetings from switzerland.
 

Attachments

  • 14543824_10154641345018493_197092787796922069_o.jpg
    14543824_10154641345018493_197092787796922069_o.jpg
    187.4 KB · Views: 983
  • 14608759_10154641354273493_4517907895026883491_o.jpg
    14608759_10154641354273493_4517907895026883491_o.jpg
    156.1 KB · Views: 960
  • 14682170_10154641353168493_3812604020401605497_o.jpg
    14682170_10154641353168493_3812604020401605497_o.jpg
    194 KB · Views: 1,027
  • 14700926_10154641348653493_1977574321206848841_o.jpg
    14700926_10154641348653493_1977574321206848841_o.jpg
    159.6 KB · Views: 1,022
  • 14700928_10154641346023493_2271961576066104980_o.jpg
    14700928_10154641346023493_2271961576066104980_o.jpg
    181.1 KB · Views: 911
  • 14701035_10154641353788493_7573730058723957544_o.jpg
    14701035_10154641353788493_7573730058723957544_o.jpg
    271.2 KB · Views: 967
  • 14712774_10154641343598493_3598682446022697219_o.jpg
    14712774_10154641343598493_3598682446022697219_o.jpg
    210.4 KB · Views: 965
  • 14714952_10154641342288493_8539343897352097913_o.jpg
    14714952_10154641342288493_8539343897352097913_o.jpg
    191.8 KB · Views: 947

Urs

Supporter
Hello Together.
We have a problem with our ZFQ Transaxle. Does someone have an email from Chris Melia ?
Sended an email to Quaife and they dont answer.
Greetings from switzerland.
 

Attachments

  • IMG-20230422-WA0005.jpg
    IMG-20230422-WA0005.jpg
    181.5 KB · Views: 218
Very odd to see the smooth fatigue failure section at the center of the break, with the rough fracture finish around the outside, however even that does not look that rough. Is there pitting in the base metal, particularly at the root of the thread?
 

Urs

Supporter
Very odd to see the smooth fatigue failure section at the center of the break, with the rough fracture finish around the outside, however even that does not look that rough. Is there pitting in the base metal, particularly at the root of the thread?
Hello
No the base metal is good, only teh bearing and seal is not good anymore.
 
Back
Top