Need help with my GTD40 Clutch

[MarkusT]

Hello Guys,
my name is Markus from Germany and i hope someone can help me with my GTD40 clutch.
The release lever is broken, but there is no part number on it
Does anybody have a idea where I can get it?

Thank you very much!

 

[Paul Hendrickx]

Hi, while you are in Germany, and while this is a Renault part Renault 21 turbo Renault 25 v6 Renault espace II v6 and various alpine. try Simon in Germany :https://www.simon-auto-shop.de/en_GB

 

[MarkusT]

Thank you Paul for the Information. I just called simon´s shop. This part is no longer available… Seems to be really difficult to get it...

Hi, while you are in Germany, and while this is a Renault part Renault 21 turbo Renault 25 v6 Renault espace II v6 and various alpine. try Simon in Germany :https://www.simon-auto-shop.de/en_GB

 

[Fred/Belgium]

Hi Markus,

I got piece a while ago at Beny Verhulst in Belgium 32 3 774 13 85. but not sure if he is still active
otherwise try Alpine forum.com in France

Grtz
Fred

 

[Paul Hendrickx]

Benny Verhulst is still active.
WIJ ZIJN ALTIJD BEREIKBAAR VOOR AL UW VRAGEN ***

​

Gezien het overheidsadvies, en onze bezorgdheid om uw en onze gezondheid, zijn we vanaf heden altijd bereikbaar voor al uw vragen en dringende interventies.​

Dit kan op 03 774 13 85 of [email protected]​

 

[Mike Pass]

Ring Chris Cole on 01952416051. He rebuilds lots of Renault boxes and will very likely have the part you want. He does not do internet stuff so you have to phone him. He also does an uprated release bearing carrier and bearing and sleeved down slave cylinders on an exchange basis,

Cheers
Mike

 

[MarkusT]

Thank you guys for your help. The fork is the same as for a DeLorean. You can buy this part at www.delorean.eu
Thanks
Markus

 

[Paul Hendrickx]

Thx for sharing this information
Paul

 

[Morten]

Hi, also Mick at Southern GT in the UK had a batch of these springs made up as these tend to break. He might be able to help you out.

[email protected]

Good luck
Morten

 

[Franky]

Hallo Markus,
Versuch es mal bei Andy von Tornado Sportscar. Das Teil sieht aus wie bei meinem Tornado.
Gruss

Frank

 

[40 Bud]

I had this part btreak several years back. My research found that it is a Lotus part. It was available thru SJ Sports cars in the UK. I bought mine from Bean Engineering here in California. The part number I have is A082F6231F - Good Luck in your search.

 

[Frank Catt]

Markus, looking at your pictures, you also need to change the clutch thrust bearing , the one you have is not correct for the pressure plate you are using, witness the wear on the fingers on the plate , Frank