glad to hear yours is a good fit. The one thing I am worried about is if the tub is not well centered relative to the frame, how can I move the spider around , since it fits on the grooves? the tub is the key for body alignment as far as I know . Right? That is why I am trying so hard to get the tub oriented relative to the frame as good as possible, then maybe fine tuning the spider and rest of body parts will be easier, we will see. Thanks for offering the measurements, I think I am good on that . Planning to start the alignment tonight .
I just feel like I am spinning my wheels for the last 2-3 weeks, no significant visible progress, just lots of thinking , planning and ordering parts. Hopefully I can start with the center console soon and shortly after that all the electrical stuff.
I did order a fuel pump controller , so that the high pressure pump will only go full blast when demand is high , the rest of the time will run easier, less noise and heat , have not decided how to wire the low pressure fuel pump yet, may also use a controller for it, or just a relay.
I also have not 100% figured out how to control the a/c compressor so that it does not over rev and blow up.
Other than that I think I finally have a good grasp on the entire electrical system , when to use ISIS, and when not (fuel pumps)