Hi,
I have some fitting issues with my wheel spinners and I would highly appreciate any input from you guys. I bought a set of Tri-Wing spinners from Vintage wheels. When I mounted them I noticed that the threads on the hubs don’t match the threads on the spinners very well. The threads on the hub measures 58.6 mm in outer diameter which I think is reasonably close to the 2” 21/64 that these cars “should” have. (2 21/64 corresponds to 59.1 mm) When I measure the inside diameter of the spinners I get 56.7 mm. Hence, the spinner is sitting very loose on the hub. The radial thread “overlap” is only 1.2 mm, i.e. (59.1-56.7)/2. To me the spinner ID (56.7 mm) appears big, but have no other reference…
/Mattias
I have some fitting issues with my wheel spinners and I would highly appreciate any input from you guys. I bought a set of Tri-Wing spinners from Vintage wheels. When I mounted them I noticed that the threads on the hubs don’t match the threads on the spinners very well. The threads on the hub measures 58.6 mm in outer diameter which I think is reasonably close to the 2” 21/64 that these cars “should” have. (2 21/64 corresponds to 59.1 mm) When I measure the inside diameter of the spinners I get 56.7 mm. Hence, the spinner is sitting very loose on the hub. The radial thread “overlap” is only 1.2 mm, i.e. (59.1-56.7)/2. To me the spinner ID (56.7 mm) appears big, but have no other reference…
/Mattias