Hi,
I seem to have a problem with the alignment of my steering column and would like your advice. If you take a look at the attached pictures, you can see that I've got the dash aligned on the left (needs minor cutout on A pillar for final fit) and the right. However, my steering column is nowhere near the center and I can't move the dash sideways any further without the vents being oddly aligned with the A pillars and the pillar covers.
Furthermore, when I've laid a seat in the car, I never have the wheel centered with the seat even if I put it as close to the center as would allow with the center console in. The wheel is also too far to the right from a feel perspective. I don't know how the pedal alignment is since I haven't final mounted the pedals yet.
So basically I'm getting two signals that my column needs to move to the left. It's about 7/16-3/4" that it needs to move to the left. My questions are:
1) Has anybody had to do this and if so, any suggestions? Or is this normal alignment?
2) I plan to take the A/C ducting off again, unplug all the wiring and drill new holes 3/4" to the left of the current ones, then fill the current ones with JB weld. Thoughts?
Many thanks,
Tim
I seem to have a problem with the alignment of my steering column and would like your advice. If you take a look at the attached pictures, you can see that I've got the dash aligned on the left (needs minor cutout on A pillar for final fit) and the right. However, my steering column is nowhere near the center and I can't move the dash sideways any further without the vents being oddly aligned with the A pillars and the pillar covers.
Furthermore, when I've laid a seat in the car, I never have the wheel centered with the seat even if I put it as close to the center as would allow with the center console in. The wheel is also too far to the right from a feel perspective. I don't know how the pedal alignment is since I haven't final mounted the pedals yet.
So basically I'm getting two signals that my column needs to move to the left. It's about 7/16-3/4" that it needs to move to the left. My questions are:
1) Has anybody had to do this and if so, any suggestions? Or is this normal alignment?
2) I plan to take the A/C ducting off again, unplug all the wiring and drill new holes 3/4" to the left of the current ones, then fill the current ones with JB weld. Thoughts?
Many thanks,
Tim