S
svsgt1
Guest
I'm making a custom LS1 to Audi 01E adapter but I need one critical deminsion that I'm hoping someone can help me with. I need to know how thick to make my custom flywheel so if anybody has the distance from the mounting surface of the gearbox/engine to the friction surface of the flywheel please let me know what it is. In other words I need the distance of where the gearbox and engine mate to where the face of the flywheel sits.
Two other less important things:
- Does anyone have a bolt pattern drawing with the correct measurements for the LS1 and/or Audi 01E that I can double check my measurements with.
- Also does anyone have the diameter and depth of the hole that the pilot bearing sits in on the flywheel?
Thanks,
Adam Grosso
Two other less important things:
- Does anyone have a bolt pattern drawing with the correct measurements for the LS1 and/or Audi 01E that I can double check my measurements with.
- Also does anyone have the diameter and depth of the hole that the pilot bearing sits in on the flywheel?
Thanks,
Adam Grosso