Brake hard line help rcr40

[Pat]

I’m finishing the hard line plumbing on my RCR40 that I bought partially assembled. Well it’s a LH car but the plumbing was started for a RH car. Seeing if anyone might have the small hard line sections for a LH car that connect at the bulkhead in the front? If not I’ll just bend some new ones. Also one of my bulkhead connectors for the front brake line was the inverted flare fitting that I believe was just used for the clutch. Trying to track down a bulkhead fitting for -3AN male to I believe 1/8-27 NPT female. Having a hard time finding one for that connection. Anyone know the part #?

Thanks!

 

[Paul Proefrock]

Pat
They come from Inline Tube, part number HLF04 3AN to 1/8NPT bulkhead fitting Link to the page: https://www.inlinetube.com/products/hlf04

 

[Pat]

Pat
They come from Inline Tube, part number HLF04 3AN to 1/8NPT bulkhead fitting Link to the page: https://www.inlinetube.com/products/hlf04

Paul you are the best!!! I spent two hours last night after posting this searching the internet for this thing and couldn’t find it anywhere!!! I thought I tried everything. You saved me hours and hours of more searching!!!

Pat

 

[Howard Jones]

Like this?

https://www.speedwaymotors.com/Straight-1-8-Inch-NPT-Female-to-AN3-Male-Adapter,32522.html?utm_medium=CSEGoogle&utm_source=CSE&utm_campaign=CSEGOOGLE&srsltid=AfmBOorIr4geu0aYmadSkDnNCcTxSoh1VLibhbiRFwWPPK-syFVisfti_qM

or this

https://www.speedwaymotors.com/Gauge-Fitting-Straight-AN3-Male-1-8-Inch-NPT-Female,949.html

Use steel fittings on Brake lines,. Aluminum ones are bad karma for brake lines.

 

[Pat]

Like this?

https://www.speedwaymotors.com/Straight-1-8-Inch-NPT-Female-to-AN3-Male-Adapter,32522.html?utm_medium=CSEGoogle&utm_source=CSE&utm_campaign=CSEGOOGLE&srsltid=AfmBOorIr4geu0aYmadSkDnNCcTxSoh1VLibhbiRFwWPPK-syFVisfti_qM

or this

https://www.speedwaymotors.com/Gauge-Fitting-Straight-AN3-Male-1-8-Inch-NPT-Female,949.html

Use steel fittings on Brake lines,. Aluminum ones are bad karma for brake lines.

The one’s that Paul linked are the exact ones that I needed. Thanks, those were the same bulk head fittings that I could only find.