Anyone out there know what font was used in the design of the steering wheel center cap? It's not the same one they used on the side of the car.
View attachment 97522
Thanks for the reply. I've worked off and on for some time to do a few things. First I'd like to make a reasonable center cap for my car. I know I can buy one but at $250 ouch. Second maybe make some CNC or 3D printed plaques. My current CNC router can do about 1' x 1' and my printer will do about 8" x 8". On the original center cap the top clear part is convex but the lettering and graphic is concave and the lettering is slightly shorter than the surrounding moon shaped parts. Without an original cap to measure or 3D scan it becomes difficult to model in CAD. What I was hoping for was a font I can just insert into my drawing.
I could also reverse the image to make molds but I'm not there yet. This is what I have so far.
View attachment 97607
Otto thanks so for your help. Can you give me one last picture. A closeup picture of the back. Also if it's possible measure from the back how deep the letters and the crescents are. "Again thanks for the help. It's people like you that makes endeavors like this possible. "
Charlie I was sorry to see your post. First I'd like to say it was never my intent to rip anyone off. All I asked for was pictures and other information about the original Ford G. T. steering wheel center cap. The pictures and other information I've posted were either of original parts or CAD drawing I've made from that information. I would appreciate an apology for your unfounded remarks.